Fusion-io ioDrive (160/112 GB) And ioXtreme (80 GB)The ioDrive, by and is still one of the fastest flash-based storage solutions you can get. It is a PCI Express-based card that employs a four-lane first-generation interface with up to 1 GB/s bandwidth in each direction. While this sounds like a disadvantage compared to more modern PCI Express 2.0-based hardware, this is not the case. The device performs well.Fusion-io talks about its use of enterprise-class performance and components.
Specifically, there are versions with 80, 120, and 320 GB that utilize SLC NAND flash memory. Another 320 GB variant and a 640 GB flagship are based on MLC flash. Fusion-io offers drivers for all Windows operating systems between Windows XP and the latest editions of Windows Server 2003 and Windows 7, as well as VMWare ESX/ESXi and various Linux distributions.The drive is not bootable and hence is only useful as a very fast layer for storage once the server or workstation is already online. The viability os such a solution is limited, but it does make sense for very particular environments where it'd be great to have 80, 120, or 320 GB of RAM were it not for the economic implications. Of course, SLC-based flash isn't as fast as system memory, but this is certainly better than short-stroked hard drives.The second product by Fusion-io is the, which also arrived in our test lab in late 2009. It is technically similar to the ioDrive, meaning that it is also not bootable. We actually had a hard time finding it on the, as it is not directly available in its Product drop-down.
Our sample sports 80 GB, and several of these cards can be combined on a system to increase capacity.The ioXtreme cards require a certain amount of system memory because the hardware does not support Native Command Queuing (remember, there is no SATA interface) and incoming commands need to be organized properly. Fusion-io supports maximum capacity mode, which provides the full 80 GB, or you can select improved write performance and maximum write performance modes. These will reduce the net capacity by 30% and 50%, but, obviously, improve write performance.Both Fusion-io cards are half-height and hence they can be deployed even into very compact system designs. You will find more details and benchmarks of both modes in our.
HP IO Accelerator Install Package version 3.2.8 supports both Generation 1 and Generation 2 HP IO Accelerators cards and contains the driver, utilities, firmware and SNMP agent for these cards. Version 3.2.8 is required for Generation 2 HP IO Accelerators, which have storage capacities of 365 GB, 785 GB, 1.2 TB, 1.6 TB, 2.4 TB, 3.0 TB and 3.2 TB. Version 3.2.8 is recommended for new installations of Generation 1 HP IO Accelerators, which have storage capacities of 80 GB, 160 GB, 320 GB, 640 GB and 1.28TB.
Prerequisites:Important Upgrade Notes:. Upgrade Path: Depending on the current firmware version of the IO Accelerator, multiple firmware updates may be required to preserve internal structures. End User License Agreements:Upgrade Requirement:Recommended - HP recommends users update to this version at their earliest convenience.Important:This software package contains the operating system driver, utilities, and firmware for the HP IO Accelerator products for VMware ESXi 5.x.The IO Accelerator devices cannot be installed as part of an ESX installation. It must be installed on an existing ESXi host system.An update/upgrade installation is not recommended. Instead uninstall the previous version of the IO Accelerator software before you install this version.A command-line interface is required to install the software.
Options are vCLI or SSH/Shell.A command-line interface is needed to manage the device using the IO Accelerator utilities. The SMI-S Python scripts or the Tech Support Mode (TSM) can be used. See the VMware article on using the TSM:.The fio-remote-utilities require Python 2.6 and PyWBEM 0.7 installed on your remote machine. Consult your distribution documentation for instructions on how to install them.WARNING:If this is an upgrade from a IO Accelerator 2.x.x version to IO Accelerator 3.x.x, the update process will require a low-level media format (fio-format) of the device. This software package contains the operating system driver, utilities, and firmware for the HP IO Accelerator products for VMware ESXi 5.x.The IO Accelerator devices cannot be installed as part of an ESX installation. It must be installed on an existing ESXi host system.An update/upgrade installation is not recommended.
Instead uninstall the previous version of the IO Accelerator software before you install this version.A command-line interface is required to install the software. Options are vCLI or SSH/Shell.A command-line interface is needed to manage the device using the IO Accelerator utilities. The SMI-S Python scripts or the Tech Support Mode (TSM) can be used. See the VMware article on using the TSM:.The fio-remote-utilities require Python 2.6 and PyWBEM 0.7 installed on your remote machine. Consult your distribution documentation for instructions on how to install them.WARNING:If this is an upgrade from a IO Accelerator 2.x.x version to IO Accelerator 3.x.x, the update process will require a low-level media format (fio-format) of the device. Upgrade Requirement:Critical - HP requires users update to this version immediately.Critical update for any VMware user with VSL3.2.3.950 installed.VSL versions prior to VSL3.2.3 for VMware are not affected by the issue - see Fixes Note for detail.Resolves VMware hypervisors unaligned IO request in VSL3.2.3.950 that may cause an error in the VSL software.
This may cause an ioMemory device to go offline and can result in data loss. Users with VSL version 3.2.3.950 installed in a hypervisor are recommended to upgrade to ioMemory VSL version 3.2.3.952. Upgrade Requirement:Recommended - HP recommends users update to this version at their earliest convenience.VSL 3.1.5 and later 3.x.x versions address premature retirement of erase blocks issue on Gen2 stand-up and mezzanine cards with capacities 365/785GB. Erase blocks are normally retired when fully utilized to ensure consistent performance over the life of the device. When the erase blocks are prematurely retired, they are not fully utilized and the life of the device can be shortened significantly after 2 or more years of use.
This firmware corrects the premature retirement of erase blocks on the affected cards - 365/785GB capacities. The blocks that are already retired are not recovered with this fix, the impact of retired blocks is insignificant for a short duration (i.e. 6-12 months). HP IO Accelerator Install Package version 3.2.8 supports both Generation 1 and Generation 2 HP IO Accelerators cards and contains the driver, utilities, firmware and SNMP agent for these cards. Version 3.2.8 is required for Generation 2 HP IO Accelerators, which have storage capacities of 365 GB, 785 GB, 1.2 TB, 1.6 TB, 2.4 TB, 3.0 TB and 3.2 TB. Version 3.2.8 is recommended for new installations of Generation 1 HP IO Accelerators, which have storage capacities of 80 GB, 160 GB, 320 GB, 640 GB and 1.28TB. Prerequisites:Important Upgrade Notes:.
Upgrade Path: Depending on the current firmware version of the IO Accelerator, multiple firmware updates may be required to preserve internal structures. End User License Agreements:Upgrade Requirement:Recommended - HP recommends users update to this version at their earliest convenience.Important:This software package contains the operating system driver, utilities, and firmware for the HP IO Accelerator products for VMware ESXi 5.x.The IO Accelerator devices cannot be installed as part of an ESX installation. It must be installed on an existing ESXi host system.An update/upgrade installation is not recommended. Instead uninstall the previous version of the IO Accelerator software before you install this version.A command-line interface is required to install the software. Options are vCLI or SSH/Shell.A command-line interface is needed to manage the device using the IO Accelerator utilities.
The SMI-S Python scripts or the Tech Support Mode (TSM) can be used. See the VMware article on using the TSM:.The fio-remote-utilities require Python 2.6 and PyWBEM 0.7 installed on your remote machine. Consult your distribution documentation for instructions on how to install them.WARNING:If this is an upgrade from a IO Accelerator 2.x.x version to IO Accelerator 3.x.x, the update process will require a low-level media format (fio-format) of the device.
This software package contains the operating system driver, utilities, and firmware for the HP IO Accelerator products for VMware ESXi 5.x.The IO Accelerator devices cannot be installed as part of an ESX installation. It must be installed on an existing ESXi host system.An update/upgrade installation is not recommended. Instead uninstall the previous version of the IO Accelerator software before you install this version.A command-line interface is required to install the software. Options are vCLI or SSH/Shell.A command-line interface is needed to manage the device using the IO Accelerator utilities.
The SMI-S Python scripts or the Tech Support Mode (TSM) can be used. See the VMware article on using the TSM:.The fio-remote-utilities require Python 2.6 and PyWBEM 0.7 installed on your remote machine. Consult your distribution documentation for instructions on how to install them.WARNING:If this is an upgrade from a IO Accelerator 2.x.x version to IO Accelerator 3.x.x, the update process will require a low-level media format (fio-format) of the device.
Upgrade Requirement:Critical - HP requires users update to this version immediately.Critical update for any VMware user with VSL3.2.3.950 installed.VSL versions prior to VSL3.2.3 for VMware are not affected by the issue - see Fixes Note for detail.Resolves VMware hypervisors unaligned IO request in VSL3.2.3.950 that may cause an error in the VSL software. This may cause an ioMemory device to go offline and can result in data loss. Users with VSL version 3.2.3.950 installed in a hypervisor are recommended to upgrade to ioMemory VSL version 3.2.3.952. Upgrade Requirement:Recommended - HP recommends users update to this version at their earliest convenience.VSL 3.1.5 and later 3.x.x versions address premature retirement of erase blocks issue on Gen2 stand-up and mezzanine cards with capacities 365/785GB. Erase blocks are normally retired when fully utilized to ensure consistent performance over the life of the device. When the erase blocks are prematurely retired, they are not fully utilized and the life of the device can be shortened significantly after 2 or more years of use.
This firmware corrects the premature retirement of erase blocks on the affected cards - 365/785GB capacities. The blocks that are already retired are not recovered with this fix, the impact of retired blocks is insignificant for a short duration (i.e.
6-12 months).
The size of the card is partially dictated by total capacity, with the NAND flash taking up the majority of the available real estate. In the 4K read test, we were able to reach a high of, IOPS, versus 50, in the lower queue depth test. Response times are blisteringly fast for the SSDs — the ioDrive only showing its advantage over the Intel XE when things get really heavy. In this review, we’re again working with the GB Fusion ioDrive Duo – this time using more sophisticated tests across both Windows and Linux. When looking at the max latency profile of the 4K write preconditioning test, many of the same traits remained, although this time around much lower. The ioDrive Duo is a complete offering that is more refined than anything else on the enterprise storage market.Uploader:Date Added:2 November 2012File Size:16.53 MbOperating Systems:Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/XDownloads:72605Price:Free.Free Regsitration RequiredIn this test we include: The File Server standard deviation profile of both the ioDrive Duo and WarpDrive stayed fairly tight together in both Windows and Linux up until the higher effective queue depths.
Fusion-io ioDrive (80GB)Dell Latitude 11 7. The design is very compact and clean, including fuxion-io well-designed support bracket on the back portion of the card.
Fusion-io claims a maximum of 1. To decide which option makes the most sense for an installation, Fusiin-io has a server configuration guide for most tier one servers that provides best case setup instructions.
While this little tidbit is listed in the manual, we’d prefer a separate download to make it more obvious that there is a BIOS update available.For the consumer or business user, trying to translate high random 4K write speeds into an everyday situation is pretty difficult. To prevent damage, the ioDrive is designed to throttle performance if it reaches an internal temp of 78C and power off at vusion-io. For benchmark purposes we always tested the card with external iodrve available. Fusion-io ioDrive Memory Card. To illustrate just how much of a jump from traditional media the ioDrive is, we compared it against a Seagate Barracuda Fusion-io lists a 1. Fusion-io ioDrive Memory Card Details Dell US Virgin IslandsFor Ubuntu, it seems as if installing the supplied. In the expanded 4K write test, speeds spiked as high asIOPS on the top end, doubling compared to the first test.
Nevada Secretary of State. Fusion-io cards require matching firmware and drivers. They’re public, so there’s plenty of detail about their financials, sales figures and the like, but a tour through their website yields precious little about the products they offer.Fusiin-io Z-Drives strengths were more on the read-heavy side, whereas the ioDrive Duo and WarpDrive found their place in a write-heavy environment.The ioDrive Duo is passively cooled, incorporating three heat sinks; designed to work in a forced-cooling server environment.
Fusion-io ioDrive – Thomas-Krenn-WikiHave a look at Thomas-Krenn. It also doesn’t make sense to assume that a drive with very high sequential speeds is going to perform great in the real-world if it can’t cope with mixed random activity. The LSI WarpDrive showed a significant spread in average latency between driversets, with the Windows driver offering the highest performance.
You have entered an incorrect email address!Given Fusion-io was an early pioneer iodrvie this particular iteration of storage technology and they own several pieces of key intellectual property around storage, it shouldn’t be that surprising that the overall package is so tight, but the level of precision is worthy of credit. We’re talking very, very fusio-nio stuff, to the point where there’s only a few places in Australia you can get them — IoMax and PixelIT being the most prominent. The card is passively cooled, incorporating three black-finned heat sinks.At StorageReview we offer the same hardware fysion-io infrastructure found in many datacenters where the devices we test would ultimately be destined for. At Maximum Capacity you’re given Being a single-threaded application the random 4K read and write figures are lower than with IOMeter with multiple workers, but it still shows just how fast the drive can be.Configure your server individually at www. Fusion-io ioDrive Duo 640gb Pci-e MLC SSD Accelerator 3f1hv Dell 7XVKM 07xvkmBoth the ioDrive Duo and WarpDrive remained close together in the Web Server average latency test, although both were easily beaten by the R4 in Windows.So while a single user is unlikely to really punish the ioDrive write-wise in any mode and should be happy with the Maximum Capacity setting, we should start to see benefits in harsh situations like a multi-user environment.While these values are higher than the quoted 0. It’s not just capacity mind you — it’s that for the first time in recent memory there’s a very real threat that even iodrlve single drive can saturate the bus it’s attached to.
Fusion Io Drivers Esxi Web Access
The trace captures the heavy read activity of each game loading from the start, as well as textures as the game progresses.
Attention, Internet Explorer UserAnnouncement: VMware Communities has discontinued support for Internet Explorer 7 and below.In order to provide the best platform for continued innovation, VMware Communities no longer supports Internet Explorer 7.VMware Communities will not function with this version of Internet Explorer. Please consider upgrading to Internet Explorer 8, 9, or 10, or trying another browser such as Firefox, Safari, or Google Chrome.(Please remember to honor your company's IT policies before installing new software!).
00: 0c: 00.0 Bridge: ASMedia Technology Inc.Card has been detected – 00:05:00.0 Mass storage controller: Fusion-io ioDimm3 Drivers installation. Download a ESXi5 drivers offline package iomemory-vsl-2.3.11.183-offlinebundle-909505.zip from FusionIO support page – – FusionIO account is needed. Upload drives on ESXi host – you can use vSphere client or WinSCP.
Install drives on ESXi. remotely using vCLI, esxcli –server software vib install -d. from console – esxcli software vib install -d. #As you can see card is running in minimal mode and firmware on card is outdated, which means Firmware upgrade is necessary Upgrade FusionIO card firmware on ESXi 5.1.
Download firmware package iodrive107053.fff from FusionIO support pagebox type=”warning” Make sure that driver version and firmware version are matches/box. Upload firmware package on ESXi5.1 host. Execute fio-update-iodrive -d /dev/fctX where X is a device number, in my case I have to upgrade firmware on both cards /dev/fct0 and /dev/fct1box type=”warning” F irmware upgrade takes around 15 minutes!! DO NOT STOP UPGRADE UTILITY OR POWER SERVER OFF/box.
Comments are closed.
|
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |